Asin: B001ASFM0E
Product brand: Hilti
Product category: Hammer Drills
Product rating:5.0
an individual visit this site together with keywords Hilti TE 7-C 120V Rotary Hammer Drill 228061
Hello guest, Hopefully right now will be your happy time. Currently I am going to tell you about the particular Hilti TE 7-C 120V Rotary Hammer Drill 228061, this is the famous product within this thirty day period. Many people are trying to find by means of search engines like yahoo to acquire Hilti TE 7-C 120V Rotary Hammer Drill 228061 on the lowest price. The good news is that we realize over it and will inform you to purchaseHilti TE 7-C 120V Rotary Hammer Drill 228061 (Black) at the cheapest price on the reliable online shop in the United States.
Description : The Hilti TE 7-C 3/4 in. 120-Volt Rotary Hammer Drill is built around a robust 6.26 Amp motor that provides 4,200 BPM and 740 RPM for drilling and light chiseling in a variety of materials. Its 3/4 in. SDS-Plus chuck permits quick interchangeability of all common chuck types, and a forward/reverse switch and 3 modes (rotation only, rotation with hammer and hammer only) add to its impressive versatility. It runs with little vibration for increased comfort, while oil lubrication fosters longer life and better cooling by dissipating more heat than grease. A case is included for added convenience.
* Ideal for drilling wood or steel where high torque is required, drilling concrete, stone and masonry as well as light chiseling in concrete and masonry
* Powerful 6.26 Amp motor delivers impressive impact power when chiseling as well as efficient drilling
* 3/4 in. SDS-Plus chuck with quick interchangeability of all common chuck types
* Delivers up to 4,200 BPM and 740 RPM
* Low vibration to help increase productivity
* Slip clutch stays consistent throughout the tool's life
* 3 modes of operation include rotation only, rotation with hammer and hammer only (for chiseling)
* Oil lubrication for longer life and better cooling by dissipating more heat than grease
* Equipped with a forward- and reverse switch
* Case included
Features :
- Ideal for drilling wood or steel where high torque is required
- Powerful 6.26 Amp motor delivers impressive impact power
- Delivers up to 4,200 BPM and 740 RPM
- Low vibration to help increase productivity
- Equipped with a forward- and reverse switch
Listed here are opinions a few potential buyers:>>
This is a real drill - probably overkill for the homeowner, but a great tool.
I suppose most buyers of these are pros, so my review may not be applicable.
Last winter I had to drill about 15 holes in a concrete floor to anchor some pallet racking - nothing special - 3/8 holes 3 inches deep. So I pull out my trusty Milwaukee 1/2 holeshooter with hammer function - which I have drilled many many anchor holes with. I don't know what kind of concrete was in that floor, but the milwaukee struggled - I resharpened 3 carbide masonry bits 3 times to get 2/3 of the holes drilled in about 2 hours. I seriously wondered if the drill or my arm was going to fail first - the vibration was incredible.
I finally decided to rent an SDS hammer.
When I went to the local tool rental they were selling these lightly used TE-7's off. They had a few of them and the one I bought couldn't have been used more than a couple times.
So I bought a couple 3/8 SDS+ bits and went back to my hole job. The first thing I noticed about this Hilti is...
No comments:
Post a Comment