Asin: B006JFNVGA
Product brand: CR Laurence
Product category: Core Drills
Product rating:
you visit this amazing site using key phrases CRL 2-1/2" Electro-Formed Diamond Drill by CR Laurence
Hi visitor, I really hope nowadays can be your blessed moment. Currently I will inform you of typically the CRL 2-1/2" Electro-Formed Diamond Drill by CR Laurence, this can be a well-known product within this 30 days. Many people are seeking via search engines like google to get CRL 2-1/2" Electro-Formed Diamond Drill by CR Laurence with the cheapest. The good news is that we realize over it and can inform you to getCRL 2-1/2" Electro-Formed Diamond Drill by CR Laurence (Black) on the best deal in the trustworthy web store in america.
Description : Diameter: 2-1/2 in (64 mm) Overall Length: 3 in (76 mm) Recommended Speed: 1200 RPM Drill Diameter: 2-1/2" (63.5 mm) For Fast Cutting, High Production Runs For Use In High-Speed Precision Drill Machines The CRL DCD Series Electro-Formed Diamond Drill has a thin-wall, with a 1/2 inch (12.7 millimeter) deep multi-layer of diamonds and bonding matrix. This drill is designed for high speed, high production drilling and produces outstanding results when exacting conditions are met. Due to the fragile nature of this type of drill, it should be used only in a precision machine, never allowing too much pressure to be applied. It is important to handle this type of diamond drill with care and use on flat surfaces only. The CRL DCD Series Drill features an extra long 1-3/8 inch (35 millimeters) by 3/8 inch (9.5 millimeter) diameter shank for a positive grip on the drill.Sharpening or "dressing" of this drill before each use will substantially increase its cutting capabilities and minimize "glazing" or dulling of the bit. A Dressing Stone is a necessity when working with an Electro-Formed Diamond Drill.Important NotesCRL DCD Series Diamond Drills have a very thin wall which makes them Extremely Fragile. They are intended for the drilling of flat (plate) glass ONLY, in a true running, production type drilling press. Never use in any type of hand drill. The use of these drills in any manner other than as specified above may damage them and will void any warranty.Always wear the proper safety gear including gloves and eye protection when drilling glass. Work should be performed on a flat, horizontal surface. A Ground Fault Circuit Interrupter must be used when using any type of electric tool in conjunction with water or coolant. Failure to follow any of these precautions can result in operator injury.
Features :
- For Fast Cutting, High Production Runs
- For Use In High-Speed Precision Drill Machines
Listed below are evaluations a few potential buyers:>>
No comments:
Post a Comment